SZS v2.35a

9 files changed, 95 insertions, 9 deletions

diff --git a/project/text-files/kmp.inc/kmp-pt-info-cr.inc b/project/text-files/kmp.inc/kmp-pt-info-cr.inc
index f11d5a8..a90e5dc 100644
--- a/project/text-files/kmp.inc/kmp-pt-info-cr.inc
+++ b/project/text-files/kmp.inc/kmp-pt-info-cr.inc
@@ -31,6 +31,6 @@
 # If you enable EXPORT-FLAGS (set it to 1), the flags are exported using the
 # lowest byte of WIDTH FACTOR. The factor needs only 2 or 3 digits, so this
 # has no disadvantage on the width factors. 5 of the 8 bits are used to verify
-# changes by other tools on import. If at least 1 of these bit of all points
+# changes by other tools on import. If at least 1 of these bit of any point
 # is wrong, import is canceled.
 @EXPORT-FLAGS = %d  # 0=disabled, 1=enabled (overridden by option --export-flags)
diff --git a/project/text-files/lex.inc/lex-elem-ritp-cr.inc b/project/text-files/lex.inc/lex-elem-ritp-cr.inc
new file mode 100644
index 0000000..88050d2
--- /dev/null
+++ b/project/text-files/lex.inc/lex-elem-ritp-cr.inc
@@ -0,0 +1,47 @@
+
+#FF#
+###############################################################################
+
+[RITP]
+# Sort order: %u
+
+# Normally only the first next-link of KMP:ITPH is used for Bullet Bill and
+# Red Shells (except when the shell has already targeted a player). In the
+# case of equivalent routes, however, it would be desirable for one of the
+# possible routes to always be selected at random. It is important to ensure
+# that everyone uses the same route when racing online.
+#
+# And exactly this can be defined with this section. Therfore you define a
+# list with rules. Each rule defines the index of the ITPH element, the number
+# of next-links affected, and the type of modification. LE-CODE is very robust
+# here and only accepts valid rules on existing elements.
+
+# Rule members:
+#   INDEX: Index of KMP:ITPH entry (0..255).
+#   NN:    Number of next-links to shuffle (2..6).
+#   MODE:  How to shuffle (see below).
+#   PARAM: Optional parameter for some modes (see below).
+
+# Modes:
+#
+#   RITP$OFF
+#	Ignore this rule, but store it including PARAM.
+#	This mode can be used to temporary deactivate a rule.
+#
+#   RITP$START
+#	Select first next-link by random at race start. The selected next-link
+#	must be defined (not -1 == not 0xff), otherwise ignore the rule.
+#	PARAM is ignored.
+#
+# More modes are planned.
+
+# Example:
+# ITPH element #10 (zero based index) has defined 3 equivalent routes and 2
+# additional routes by its next-links. At race start one of the first 3 links
+# should be selected by random as standard route. The rule for this case is:
+#
+#	10 3 RITP$START
+#
+# This rule is ignored by LE-CODE, if the addressed ITPH element does not
+# exists or if the by random selected next-link is not defined.
+
diff --git a/project/text-files/lex.inc/lex-elem-ritp-tabhead-cr.inc b/project/text-files/lex.inc/lex-elem-ritp-tabhead-cr.inc
new file mode 100644
index 0000000..971cafb
--- /dev/null
+++ b/project/text-files/lex.inc/lex-elem-ritp-tabhead-cr.inc
@@ -0,0 +1,4 @@
+#RITP#
+#-----------------------------
+# index nn  mode        param
+#-----------------------------
diff --git a/project/text-files/lex.inc/lex-elem-set1-cr.inc b/project/text-files/lex.inc/lex-elem-set1-cr.inc
index 4700bc8..e41d1ca 100644
--- a/project/text-files/lex.inc/lex-elem-set1-cr.inc
+++ b/project/text-files/lex.inc/lex-elem-set1-cr.inc
@@ -25,3 +25,12 @@
 # tracks that must be marked with value 1 as an exception to avoid banning.
 
 @START-ITEM = %u
+
+# If playing online, the racing time is limited. The original MKW uses 5:00
+# and LE-CODE 5:40 by default. A racing track can apply another online limit
+# if the following setting is >0. Values between %us%s and %us%s
+# are accepted. LPAR settings MIN-ONLINE-SEC and MAX-ONLINE-SEC limit the
+# actually used value.
+
+@APPLY-ONLINE-SEC = %u%s
+
diff --git a/project/text-files/lex.inc/lex-elem-set1-develop-cr.inc b/project/text-files/lex.inc/lex-elem-set1-develop-cr.inc
index b639c61..f0de66c 100644
--- a/project/text-files/lex.inc/lex-elem-set1-develop-cr.inc
+++ b/project/text-files/lex.inc/lex-elem-set1-develop-cr.inc
@@ -5,6 +5,4 @@
 # values can still change. Therefore, they should not be used, or at most
 # experimentally.
 
-@TEST_0D = %d
-@TEST_0E = %d
-@TEST_0F = %d
+@PADDING-0D = %d
diff --git a/project/text-files/lex.inc/lex-hexdump-cr.inc b/project/text-files/lex.inc/lex-hexdump-cr.inc
index 156281f..ecd3e28 100644
--- a/project/text-files/lex.inc/lex-hexdump-cr.inc
+++ b/project/text-files/lex.inc/lex-hexdump-cr.inc
@@ -5,12 +5,25 @@
 [HEXDUMP]
 # Sort order: %u
 
-# Unknown sections are stored as hexdump to keep the data. The address field
-# and the ASCII part are for info only and ignored on scanning.
+# Unknown sections are stored as hexdump to keep the data. Parameter @MAGIC
+# defines the type of the section.
 
 @MAGIC = 0x%08x # %s
 
+# Syntax of the data lines:
+#	HEXLINE := [ ADDRESS ':' ] DATA [COMMENT]
+#	COMMENT := ( [ ':' | '#' | '/' ) ANY_TEXT
+#	DATA    := HEXBYTE | EXPR
+#	EXPR    := '(' SZS_TOOLS_EXPRESSION ')'
+#
+# The address field and the ASCII part (a COMMENT by definition) are for info
+# only and ignored on scanning.
+#
+# The result of SZS_TOOLS_EXPRESSION is stored in network byte order (big
+# endian). Integers and floats are stored as 4 bytes, vectors as 3 floats with
+# 12 bytes total. Strings are stored as bytes without terminating NULL.
+
 #HEX#
 #----+------------------------------------------------------+----------------+
-#addr:   data: bytes in hex  |  '(' expression ')'          : ASCII of data  :
+#addr:   data:  byte in hex  |  '(' expression ')'          : ASCII of data  :
 #----+------------------------------------------------------+----------------+
diff --git a/project/text-files/lex.inc/lex-hexdump-sep-cr.inc b/project/text-files/lex.inc/lex-hexdump-sep-cr.inc
new file mode 100644
index 0000000..403297c
--- /dev/null
+++ b/project/text-files/lex.inc/lex-hexdump-sep-cr.inc
@@ -0,0 +1 @@
+#----+------------------------------------------------------+----------------+
diff --git a/project/text-files/lex.inc/lex-setup-cr.inc b/project/text-files/lex.inc/lex-setup-cr.inc
index 9ba1e5f..2e22c97 100644
--- a/project/text-files/lex.inc/lex-setup-cr.inc
+++ b/project/text-files/lex.inc/lex-setup-cr.inc
@@ -5,7 +5,7 @@
 [SETUP]
 # This is the general setup and info section. Some parameters are preceeded by
 # a hash ('#') to signal the informative only status. This section should
-# always be the first one.
+# always be the first one to setup correct scanning modes.
 
 # Identify the tool and version, that have written this file:
 TOOL     = %s
@@ -14,4 +14,4 @@ VERSION  = %s
 REVISION = %u
 DATE     = %s
 
-# Statistics: List of all included sections (magic text+hex,size):
+# Statistics: List of all included sections (magic name+hex,size):
diff --git a/project/text-files/lpar.inc/lpar-sect-param-cr.inc b/project/text-files/lpar.inc/lpar-sect-param-cr.inc
index e83bb8e..d165e35 100644
--- a/project/text-files/lpar.inc/lpar-sect-param-cr.inc
+++ b/project/text-files/lpar.inc/lpar-sect-param-cr.inc
@@ -130,3 +130,17 @@ BLOCK-TEXTURES	= %u
 
 STATICR-POINTS	= %u
 
+# If playing online, the racing time is limited. The original MKW uses 5:00
+# and LE-CODE & CTGP use 5:40. With the next parameter this time can be
+# changed between %us%s and %us%s. If the time is >%u%s, then
+# the related watchdog (countdown + race_time + scoreboards) is disabled.
+
+DEF-ONLINE-SEC	= %3u%s
+
+# A racing track can request a different online limit by LEX setting
+# SET1:APPLY-ONLINE-SEC. The following 2 parameters limit the actually used
+# value. If either of them is zero, then SET1:APPLY-ONLINE-SEC is ignored.
+
+MIN-ONLINE-SEC	= %3u%s
+MAX-ONLINE-SEC	= %3u%s
+