diff options
Diffstat (limited to 'project/text-files')
8 files changed, 226 insertions, 4 deletions
diff --git a/project/text-files/ctcode.inc/ctcode-list-syntax-full-cr.inc b/project/text-files/ctcode.inc/ctcode-list-syntax-full-cr.inc index e1e4fb2..34d3158 100644 --- a/project/text-files/ctcode.inc/ctcode-list-syntax-full-cr.inc +++ b/project/text-files/ctcode.inc/ctcode-list-syntax-full-cr.inc @@ -7,13 +7,18 @@ # # * Option: '%' name = value # -# Set option NAME to VAULE. The follwing options are supported: +# Set option NAME to VAULE. The following options are supported: # # LE-FLAGS = 0 | 1 # Enable or disable support of LE-FLAGS member. At section start # it is disabled. If enabled, the Track definition expects an # additional parameter between 'property_id' and 'file_name'. # +# N-STRINGS = 4..255 +# Define the number of strings beginning with string FILE_NAME. +# Use this setting to allow more than 4 strings without running +# into a syntax error. +# # * Nintendo track mode: 'N' mode # # This command can only be used once and only before the first track @@ -124,6 +129,11 @@ # that tracks with equal identifiers are equal. Empty strings # and a single "-" means: no identifier available. # +# * xname +# Optional string, tha can be used by e.g. »wlect CREATE XNAMES« +# or »wlect CREATE XINFO« to create listings with this extended +# names. This string is supported since v2.29. +# # * Hidden track definition: # 'H' music_id ';' property_id ';' file_name ';' info ';' id # 'H' music_id ';' property_id ';' le_flags ';' file_name ';' info ';' id diff --git a/project/text-files/distrib.inc/distrib-tracks-cr.inc b/project/text-files/distrib.inc/distrib-tracks-cr.inc index 47c0e71..21c6935 100644 --- a/project/text-files/distrib.inc/distrib-tracks-cr.inc +++ b/project/text-files/distrib.inc/distrib-tracks-cr.inc @@ -1,9 +1,28 @@ #FF# +[TRACK-LIST] #------------------------------------------------------------------------------ -# Track listing of format: SHA1 SLOT NAME +# Track listing #------------------------------------------------------------------------------ -# Please edit the slot column. Use »CUP.INDEX« (e.g. »1.2« or »20.4«) for -# racing tracks and »'A' CUP.INDEX« (e.g. »A1.1« or »A2.5«) for battle arenas. +# This is the track listing. 2 formats are supported: +# old: SHA1 CUP NAME +# new: TYPE FLAGS SHA1 TRACK_SLOT CUP NAME +# +# TYPE is either 'vs' or 'bt'. When TYPE is present, then TRACK_SLOT is +# expected. SHA1 is the SHA1 checksunm of the track. +# FLAGS information about features: +# d:is _d file / t:title only / h:hidden / o:original track +# SHA1 is the sha1 of the track. +# TRACK_SLOT is a number between 0 and 4095 to define the slot number of the +# track. If <0 or not a number, the slot is undefined. +# CUP is of format "cup.index". An optional 'A' can be used as the first +# character to indicate an arena. However, this indicator is ignored if +# TYPE is present. Set it to "-" if the cup is unknown. +# All other characters are read in as the NAME of the track. +# +# The new format is compatible with Wiimmfi.de for region limits. + +# Please edit the CUP column if missed. Use »CUP.INDEX« (e.g. »1.2« or »20.4«) +# for racing tracks and »'A' CUP.INDEX« (e.g. »A2.5«) for battle arenas. diff --git a/project/text-files/ledis.inc/ledis-ctdef-header-cr.inc b/project/text-files/ledis.inc/ledis-ctdef-header-cr.inc new file mode 100644 index 0000000..98415f0 --- /dev/null +++ b/project/text-files/ledis.inc/ledis-ctdef-header-cr.inc @@ -0,0 +1,30 @@ +%s + +#------------------------------------------------------------------------------ +# +# This file was created by »wlect distrib ... CTDEF=...«. It is not guaranteed +# to correctly represent all features of the distribution. This applies in +# particular to the slot arrangement. In addition, only the property slots can +# be defined for the battle arenas. +# +# As an alternative, the use of LEDEF= instead of CTDEF= is recommended. +# +# Due to some new parameters, this file can only be read with the tools since +# version 2.28a. +# +#------------------------------------------------------------------------------ + +[RACING-TRACK-LIST] + +# Define the maximum number of strings of track definition: +%%N-STRINGS = 4 + +# Enable support for LE-CODE flags (0=no, 1=yes): +%%LE-FLAGS = 1 + +# Auto insert a Wiimm cup with 4 special random slots (0=no, 1=yes): +%%WIIMM-CUP = %d + +# Standard setup +N N$SWAP | N$F_WII + diff --git a/project/text-files/ledis.inc/ledis-ledef-cup-list-cr.inc b/project/text-files/ledis.inc/ledis-ledef-cup-list-cr.inc new file mode 100644 index 0000000..233ba62 --- /dev/null +++ b/project/text-files/ledis.inc/ledis-ledef-cup-list-cr.inc @@ -0,0 +1,67 @@ + +# +################ + [CUP-LIST] +################ + +# It makes no sense not to fill cups with tracks. Therefore, cups are simply +# filled with tracks in order of definition and new cups are created as +# needed. This is usually done with the command APPEND. Battle arenas and +# versus tracks are considered separately and the tracks are assigned +# accordingly. +# +# Battle and versus cup definitions can be done in any order. Only the +# sequences within battle cups and within versus cups are important. +# +# The command NEW-CUP creates a new battle or versus (vs) cup. Any +# unoccupied places in the current cup remain empty at the moment. +# +# At the end, when all commands have been processed, more cups may be added to +# get an even number of battle cups and of versus cups. Then all cups are +# filled with arenas and tracks. This happens first with tracks not yet used +# (if the related option is activated), and then with tracks already used. +# +# Hidden tracks can't be added to a cup. +# +# Syntax: +# +# APPEND track... +# Add each valid track reference to the current cup of correct type. +# If a cup is full, create a new before adding the track. +# +# NEW-CUP bt|vs [bt|vs] +# Close the current battle cup (bt) or versus cup (vs). Use both 'bt' +# and 'vs' to close the cups of both types. + +# There are 4 more commands to insert cups at the current position. They are +# usually used before any other cup definition: +# +# STANDARD-BATTLE-CUPS +# Append 10 tracks (slots 32 to 41) to the correct cup type. Usually +# all tracks are of type battle. +# +# STANDARD-VERSUS-CUPS +# Append 10 tracks (slots 0 to 31) to the correct cup type. Usually +# all tracks are of type versus. +# +# STANDARD-CUPS +# Short cut for STANDARD-BATTLE-CUPS and STANDARD-VERSUS-CUPS. +# +# MKWFUN-RANDOM-CUP +# Append 4 random slots (slots 62 to 65, like MKW-Fun, always versus) +# to the versus cups. +# +# If no cup was finally defined, then STANDARD-BATTLE-CUPS and/or +# STANDARD-VERSUS-CUPS will be executed automatically. + +# There are 3 options to add cups at the end. Set it to NO (=0) or YES (=1) +# at any place in the section: +# +# ADD-UNUSED-ARENAS = no/yes +# ADD-UNUSED-TRACKS = no/yes +# ADD-UNUSED = no/yes +# If defined arenas or tracks except hidden tracks were not used in at +# least one cup, then add cups with references to these missed tracks. +# CUPS-FOR-MISSED set both other settings in one step. +# + diff --git a/project/text-files/ledis.inc/ledis-ledef-header-cr.inc b/project/text-files/ledis.inc/ledis-ledef-header-cr.inc new file mode 100644 index 0000000..fd01d60 --- /dev/null +++ b/project/text-files/ledis.inc/ledis-ledef-header-cr.inc @@ -0,0 +1,11 @@ +%s + +#------------------------------------------------------------------------------ +# +# This file was created either by command »wlect distrib ... LE-DEF=...« or by +# command »wlect create LE-DEF«. +# +# This file can only be read by the tools since version 2.28a. +# +#------------------------------------------------------------------------------ + diff --git a/project/text-files/ledis.inc/ledis-ledef-setup-cr.inc b/project/text-files/ledis.inc/ledis-ledef-setup-cr.inc new file mode 100644 index 0000000..4b43c3f --- /dev/null +++ b/project/text-files/ledis.inc/ledis-ledef-setup-cr.inc @@ -0,0 +1,16 @@ + +# +############# + [SETUP] +############# + +# General setup. +# With the exception of section [TOOL], this must always be the first section. + +#------------------------------------------------------------------------------ + +# Should the 10 battle arenas (slots 32-41) and 32 versus tracks (slots 0-31) +# be automatically defined with the original tracks? (0=NO/1=YES): +ORIG-BATTLE-ARENAS = %s +ORIG-VERSUS-TRACKS = %s + diff --git a/project/text-files/ledis.inc/ledis-ledef-track-list-cr.inc b/project/text-files/ledis.inc/ledis-ledef-track-list-cr.inc new file mode 100644 index 0000000..f5c82f4 --- /dev/null +++ b/project/text-files/ledis.inc/ledis-ledef-track-list-cr.inc @@ -0,0 +1,54 @@ + +# +################## + [TRACK-LIST] +################## + +# A track definition consists of a basic definition (keyword TRACK) and any +# number of additional definitions (keywords FILE, IDENT, NAME and XNAME). + +# Normally the first free slot intended for the track type is used. The slot +# for the directly following TRACK definition can be set by the command: +# SLOT index + +# Keyword TRACK introduces a track definition. The syntax is as follows: +# 'TRACK' VARNAME TYPE PROPERTY MUSIC FLAGS +# +# If VARNAME is not '0' then the corresponding variable is assigned the +# current slot number. Variables are needed for cup references in section +# [CUP-LIST]. If cups are created exclusively automatically, then the value +# '0' is a good choice. The exporter uses 'bt' for battle or 'vs' for versus +# followed by the decimal slot number as variable name. +# +# TYPE is either 'vs' (versus) or 'bt' (battle). Both names are defined as +# constants. +# +# PROPERTY is the property slot to use. It is either a number (0-31 for 'vs' +# or 32-41 for 'bt'), or a symbolic name (like A25, T12 or MMM) of a track. +# +# MUSIC is the music-id to use. It is either a property slot number number +# (0-41) or a music id (117-199) or a symbolic name of a track. +# +# FLAGS is either a number or a string. A string is scanned for letters +# (case insensitive) to build a number: +# 'N' : LE$F_NEW : Track is marked as "new track". +# 'H' : LE$F_HEAD : Track is marked as "head of a group". +# 'G' : LE$F_GROUP : Track is marked as "group member". +# A track is considered hidden if the group flag (G) is set but the head flag +# (H) is not. + +# The keywords FILE, IDENT, NAME and XNAME define strings for the last defined +# track. Syntax: +# KEYWORD "TEXT" +# The TEXT is assigned to the track. The indention of the exporter is only +# used for clarity. + +# There are 2 more commands to define standard arenas or tracks at the current +# position. Best is to use these commands at top of the section: +# +# STANDARD-BATTLE-ARENAS +# Define 10 standard battle arenas. +# +# STANDARD-VERSUS-TRACKS +# Define 32 standard versus tracks. + diff --git a/project/text-files/ledis.inc/ledis-tool-cr.inc b/project/text-files/ledis.inc/ledis-tool-cr.inc new file mode 100644 index 0000000..bf8348d --- /dev/null +++ b/project/text-files/ledis.inc/ledis-tool-cr.inc @@ -0,0 +1,15 @@ + +# +############ + [TOOL] +############ + +# Information about the tool that created this file. +# This section is optional. If present, it must be the first section. + +TOOL = %s +SYSTEM = %s +VERSION = %s +REVISION = %u +DATE = %s + |