diff options
| -rw-r--r-- | project/text-files/config.inc/config-paths-cr.inc | 38 | ||||
| -rw-r--r-- | project/text-files/lpar.inc/lpar-sect-debug-docu-cr.inc | 66 |
2 files changed, 104 insertions, 0 deletions
diff --git a/project/text-files/config.inc/config-paths-cr.inc b/project/text-files/config.inc/config-paths-cr.inc new file mode 100644 index 0000000..2700556 --- /dev/null +++ b/project/text-files/config.inc/config-paths-cr.inc @@ -0,0 +1,38 @@ + +[PATHS] +# This section defines different paths. Each path may contain any number of +# references to other paths by »$(NAME)«. All names are case sensitive. +# >>> Please use '/' and not '\' as directory separator, even for Cygwin. <<< + +# The base is only a helper path to allow relative paths. It is not used +# internally. For Cygwin, it is usually Windows »PROGRAMFILES«. For other +# systems it is »/usr/local«. +base = %s + +# The directory, where the tools will be installed. After installation +# it is used for updates. It is usually »$(base)/Wiimm/SZS« for Cygwin +# and »$(base)/bin« for other systems. +install = %s + +# File or directory, where a configuration should be stored on installation. +# The filename »wiimms-szs-tools.conf« is appended for directories. +# An existing file is scanned and rewritten. If empty, don't create it. +config = %s + +# The following is a directory list in the order in which the configuration +# file is searched. Uncomment a line to override the previous setting. +# config = "$(xdg_home)/szs/" # XDG directory of the user +# config = "$(home)/.szs/" # Home directory of the user +# config = "$(xdg_etc)/" # Standard XDG config-dir for unix based systems +# config = "/etc/" # Standard config-dir for unix based systems +# config = "$(share)/" # Directory of shared files (bad choice) +# config = "$(install)/" # Directory of installation + +# The directory for shared files. It is usually »$(install)« for Cygwin and +# »$(base)/share/szs« for other systems. +share = %s + +# The directory in which the auto-add files are saved and searched for first. +# It is usually »$(share)/auto-add« for all systems. +autoadd = %s + diff --git a/project/text-files/lpar.inc/lpar-sect-debug-docu-cr.inc b/project/text-files/lpar.inc/lpar-sect-debug-docu-cr.inc new file mode 100644 index 0000000..68dd73d --- /dev/null +++ b/project/text-files/lpar.inc/lpar-sect-debug-docu-cr.inc @@ -0,0 +1,66 @@ + +#FF# +############################################################################### + +[DEBUG-DOCU] +# This section has no impact! + +# If the general parameter DEBUG (see section [LECODE-PARAMETERS]) is set to +# a value ≥1, then additional information is added below the speed (even if +# speedometer is disabled). The intention is to debug tracks. + +# For DEBUG=1, the output format is defined in this section. Up to %d lines +# can be defined. + +#------------------------------------------------------------------------------ + +# SETUP = DEBUG$... +# Usually, a debug section is edited, so that not specified parameters are +# not modified (same as DEBUG$OFF). With SETUP a section can be initialized: +# +# DEBUG$OFF : Do nothing. +# DEBUG$CLEAR : Clear all data. +# +# DEBUG$STANDARD : Use a standard debug line for the player. +# DEBUG$OPPONENT : Use a standard debug line for the player and one more line +# for the first opponent. +# DEBUG$VERTICAL : Arrange the output vertically for the player. + +#------------------------------------------------------------------------------ + +# LINE = -1 | 0..%d +# LINE selects a line for the next parameters. Lines are numbered from 0 to %d. +# If set to -1, then ignore the following settings. + +# ENABLED = 0|1 +# ENABLED defines, if this section becomes active. If set to 0 or if all other +# parts are disabled, then the debug line is not printed. So you can disable a +# line without changing the other parameters. + +# OPPONENT = 0|1 +# It is possible to display the data of the current player (0), or of the +# first opponent (1). The intention is watch onlyine 2 players together. +# The font color for current player if yellow and for the opponent cyan. + +# SPACE = 0|1 +# ??? + +# POSITION = 0|1 +# If enabled (1), then print the position of the player. Values outside the +# range ±131071 are highlighted to point to a item position bug. The output +# format is »P=x,y,z«. + +# CHECK-POINT = 0..3 +# If enabled (1,2,3), then print the checpoint info of the player. The output +# format is either »CK=c« (1), »CK=c,k« (2) or »CK=c,k^m«. »c« is the current +# check point. »k« is the last relevant key check point. »m« is the highest +# reached key check point in the current lap. If driving backwards, »k« is +# decreased, but »m« not. + +# RESPAWN = 0|1 +# If enabled (1), then print the current respawn point as »R=num«. + +# LAP-POS = 0|1 +# If enabled (1), then print the current calculated lap position as a floating +# point number with 3 fraction digits (1.234). This number is calculated by +# Mario Kart Wii to compare positions. |