diff options
Diffstat (limited to '')
| -rw-r--r-- | brlyt.c | 184 |
1 files changed, 136 insertions, 48 deletions
@@ -99,24 +99,21 @@ unsigned short short_swap_bytes(unsigned short short1) return *newShort; } -int bit_extract(unsigned int num, unsigned int start, unsigned int end) +unsigned int bit_extract(unsigned int num, unsigned int start, unsigned int end) { if (end == 100) end = start; //simple bitmask, figure out when awake //unsigned int mask = (2**(31 - start + 1) - 1) - (2**(31 - end) - 1) unsigned int mask; int first = 0; - int firstMask = 0; - if (start<32) firstMask = 1; - + int firstMask = 1; for (first;first<31-start+1;first++) { firstMask *= 2; } firstMask -= 1; first = 0; - int secondMask = 0; - if (end<31) secondMask = 1; + int secondMask = 1; for (first;first< 31-end;first++) { @@ -124,23 +121,16 @@ int bit_extract(unsigned int num, unsigned int start, unsigned int end) } mask = firstMask = secondMask; int ret = (num & mask) >> (31 - end); + //printf("%08x, %08x, %08x, %08x\n", firstMask, secondMask, mask, ret); return ret; } /* void get_opt(char* chunk, int startpos, bool enabled, int size, char* item_type) { -// if (!enabled) { -// return None, startpos - if (item_type != "None") { - //parse_data is your memcopy from chunk to struct_item_type - ret = parse_data(chunk[startpos:startpos+size], item_type) - }else if (size == 4) { - ret = struct.unpack('>I', chunk[startpos:startpos+4])[0] - }else if (size % 4 == 0) { - ret = struct.unpack('>' + 'I'*(size/4), chunk[startpos:startpos+size]) - }else - raise Exception('unhandled') + //parse_data is your memcopy from chunk to struct_item_type + ret = parse_data(chunk[startpos:startpos+size], item_type) + BRLYTReadDataFromMemory(&ibrlyt_item_type, BRLYT_file, sizeof(brlyt_item_type)); return ret, startpos + size } @@ -153,7 +143,8 @@ void get_array(char *chunk, int startpos, int array_size, int item_size, char *i for (n;n<array_size;n++) { //ar.append(get_opt(chunk, pos, True, item_size, item_type)[0]) - get_opt(chunk, pos, True, item_size, item_type); + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&brlyt_item_type, BRLYT_file, sizeof(brlyt_item_type)); pos += item_size; } return ar, pos @@ -453,27 +444,57 @@ void PrintBRLYTEntry_mat1(brlyt_entry entry, u8* brlyt_file) { int offset; BRLYT_ReadDataFromMemory(&offset, brlyt_file, sizeof(offset)); - //PRINT offset CRAP printf(" offset: %08x\n", be32(offset)); brlyt_material_chunk data3; BRLYT_ReadDataFromMemory(&data3, brlyt_file, sizeof(brlyt_material_chunk)); - //PRINT material CRAP printf(" name: %s\n", data3.name); printf(" tev_color: %#x,%#x,%#x,%#x\n", be16(data3.tev_color[0]), be16(data3.tev_color[1]), be16(data3.tev_color[2]), be16(data3.tev_color[3])); printf(" unk_color: %#x,%#x,%#x,%#x\n", be16(data3.unk_color[0]), be16(data3.unk_color[1]), be16(data3.unk_color[2]), be16(data3.unk_color[3])); printf(" unk_color_2: %#x,%#x,%#x,%#x\n", be16(data3.unk_color_2[0]), be16(data3.unk_color_2[1]), be16(data3.unk_color_2[2]), be16(data3.unk_color_2[3])); printf(" tev_kcolor: %#x,%#x,%#x,%#x\n", be32(data3.tev_kcolor[0]), be32(data3.tev_kcolor[1]), be32(data3.tev_kcolor[2]), be32(data3.tev_kcolor[3])); - printf(" flags: %u\n", be32(data3.flags)); - /* + printf(" flags: %08x\n", be32(data3.flags)); + //more junk to do with bit masks and flags - mat_texref = get_array(chunk, mpos, bit_extract(data3.flags, 28,31), 4, 'texref'); + //mat_texref = get_array(chunk, mpos, bit_extract(data3.flags, 28,31), 4, 'texref'); + unsigned int flaggs = be32(data3.flags); + printf(" bitmask: %08x\n", bit_extract(flaggs, 28, 31)); + int n = 0; + for (n;n<bit_extract(flaggs, 28,31);n++) + { + brlyt_texref_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_texref_chunk)); + printf(" texoffs: %08x\n", be16(data4.tex_offs)); + printf(" wrap_s: %08x\n", data4.wrap_s); + printf(" wrap_t: %08x\n", data4.wrap_t); + //pos += item_size; + } - for a in mat['texref'] - a['tex'] = textures[a['tex_offs']]['name'] - //# 0x14 * flags[24-27], followed by - mat['ua2'], mpos = get_array(chunk, mpos, bit_extract(flags, 24, 27 ), 0x14, 'ua2') + int a = 0; + for (a;a<n;a++) + //ugly hack for this one, need a textures list + printf(" name: smiley.tpl\n"); +// a['tex'] = textures[a['tex_offs']]['name'] +// # 0x14 * flags[24-27], followed by + n = 0; + for (n;n<bit_extract(flaggs, 24,27);n++) + { + brlyt_ua2_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_ua2_chunk)); + printf(" ua2: %08x, %08x, %08x, %08x, %08x\n", float_swap_bytes(data4.unk[0]), float_swap_bytes(data4.unk[1]), float_swap_bytes(data4.unk[2]), float_swap_bytes(data4.unk[3]), float_swap_bytes(data4.unk[4])); + //pos += item_size; + } //# 4*flags[20-23], followed by - mat['ua3'], mpos = get_array(chunk, mpos, bit_extract(flags, 20, 23 ), 4, '4b') + n = 0; + for (n;n<bit_extract(flaggs, 20,23);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" ua3: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } //# Changing ua3 things //# 1st --> disappears. //# 2nd --> no visible effect. @@ -481,32 +502,99 @@ void PrintBRLYTEntry_mat1(brlyt_entry entry, u8* brlyt_file) //# 4th --> no visible effect. //# 4 * flags[6] - mat['ua4'], mpos = get_opt(chunk, mpos, bit_extract(flags, 6), 4, ' 4b') + n = 0; + for (n;n<bit_extract(flaggs, 6,100);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" ua4: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } //# 4 * flags[4] - mat['ua5'], mpos = get_opt(chunk, mpos, bit_extract(flags, 4), 4, ' 4b') + n = 0; + for (n;n<bit_extract(flaggs, 4,100);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" ua5: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } //# 4 * flags[19] - mat['ua6'], mpos = get_opt(chunk, mpos, bit_extract(flags, 19), 4, '4b') - //# 0x14 * flags[17-18] - mat['ua7'], mpos = get_array(chunk, mpos, bit_extract(flags, 17, 18 ), 0x14, 'ua7') + n = 0; + for (n;n<bit_extract(flaggs, 19,100);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" ua6: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } + n = 0; + for (n;n<bit_extract(flaggs, 17,18);n++) + { + brlyt_ua7_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_ua7_chunk)); + printf(" ua7 a: %08x\n", be32(data4.a)); + printf(" ua7 b: %08x\n", be32(data4.b)); + printf(" ua7 c: %f\n", float_swap_bytes(data4.c)); + printf(" ua7 d: %08x\n", be32(data4.d)); + printf(" ua7 e: %08x\n", be32(data4.e)); + //pos += item_size; + } //# 4 * flags[14-16] - mat['ua8'], mpos = get_array(chunk, mpos, bit_extract(flags, 14, 16 ), 4, '4b') + n = 0; + for (n;n<bit_extract(flaggs, 14,16);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" ua8: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } //# 0x10 * flags[9-13] - mat['ua9'], mpos = get_array(chunk, mpos, bit_extract(flags, 9, 13) , 0x10, '10b') + n = 0; + for (n;n<bit_extract(flaggs, 9,13);n++) + { + brlyt_10b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_10b_chunk)); + printf(" ua8: %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3], data4.unk[4], data4.unk[5], data4.unk[6], data4.unk[7], data4.unk[8], data4.unk[9], data4.unk[10], data4.unk[11], data4.unk[12], data4.unk[13], data4.unk[14], data4.unk[15]); + //pos += item_size; + } //# 4 * flags[8], these are bytes btw - mat['uaa'], mpos = get_opt(chunk, mpos, bit_extract(flags, 8), 4, ' 4b') + n = 0; + for (n;n<bit_extract(flaggs, 20,23);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" uaa: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } //# 4 * flags[7] - mat['uab'], mpos = get_opt(chunk, mpos, bit_extract(flags, 7), 4, ' 4b') - if n < vars['num'] - 1 - { - next_offset, = struct.unpack('>I', chunk[pos+4:pos+8]) - if next_offset - 8 != mpos: - mat['~_insane'] = next_offset - 8 - mpos //# Extra shit we di dn't parse :( - } - mat['unk_bit_5'] = bit_extract(flags, 5) - mat['unk_bits_0_3'] = bit_extract(flags, 0, 3) //# Overwritten by stu ff - vars['materials'].append(mat) - pos += 4 - */ + n = 0; + for (n;n<bit_extract(flaggs, 20,23);n++) + { + brlyt_4b_chunk data4; + //get_opt(chunk, pos, True, item_size, item_type); + BRLYT_ReadDataFromMemory(&data4, brlyt_file, sizeof(brlyt_4b_chunk)); + printf(" uab: %08x, %08x, %08x, %08x\n", data4.unk[0], data4.unk[1], data4.unk[2], data4.unk[3]); + //pos += item_size; + } +// if n < vars['num'] - 1 +// { +// next_offset, = struct.unpack('>I', chunk[pos+4:pos+8]) +// if next_offset - 8 != mpos: +// mat['~_insane'] = next_offset - 8 - mpos //# Extra shit we di dn't parse :( +// } +// mat['unk_bit_5'] = bit_extract(flags, 5) +// mat['unk_bits_0_3'] = bit_extract(flags, 0, 3) //# Overwritten by stu ff +// vars['materials'].append(mat) +// pos += 4 + } } |